XPeel

Azenta XPeel plate peeler documentation. This page describes all available commands and their parameters for controlling the XPeel instrument.

Table of Contents

1. Overview
2. Configuration
3. Commands
   1. Peel
   2. CheckStatus
   3. Reset
   4. Restart
   5. GetRemainingTape

---

Overview

Device Information

Manufacturer:	Azenta
Category:	Plate Peeler
Package:	com.science.foundry.tools.grpc_interfaces.xpeel

Configuration

Configuration Parameters

Parameter	Type	Description
com_port	string	COM port for device communication

Commands

Peel

Peels the seal from the current plate.

Parameters

Parameter	Type	Description
threshold	int32	Force threshold for peeling operation

CheckStatus

Checks the current status of the XPeel device.

Parameters

No parameters required

Reset

Resets the XPeel device to its default state.

Parameters

No parameters required

Restart

Restarts the XPeel device.

Parameters

No parameters required

GetRemainingTape

Gets the amount of remaining tape in the device.

Parameters

No parameters required